fits model: Zx-12r. make: Kawasaki. year: 1999–2004.

( Manufacturer Part Number: 058IT ), ( Part Type: Led Turn Brake Light Signal ), ( Placement On Vehicle: Rear ), ( Lens Color: Clear ), ( Bundle Listing: Yes ), ( UPC: 815726023536 )
The ZX-12R LED Brake Tail Light Integrated Turn Signal is a high-quality, upgraded replacement for the original tail light on Kawasaki ZX-12R motorcycles from 1999 to 2004 (models 04058IT and 058726023536). This LED tail light not only provides improved visibility due to its bright, long-lasting LED bulbs, but also integrates turn signals within the same housing for a sleek, modern look.
The tail light features a durable, waterproof construction with a smoked lens, giving it a stylish appearance that complements the overall look of your motorcycle. The LED turn signals are ultra-bright, ensuring other drivers can easily see your intentions when changing lanes or turning.
The ZX-12R LED Brake Tail Light Integrated Turn Signal is easy to install, requiring only basic tools and a few minutes of your time. It is a direct replacement for the original tail light, so no modifications to the wiring harness are necessary. The tail light comes with all necessary mounting hardware, including screws and a bracket, for a hassle-free installation.
In addition to its stylish appearance and improved visibility, the ZX-12R LED Brake Tail Light Integrated Turn Signal is also a cost-effective upgrade. Unlike traditional incandescent bulbs, LED bulbs consume less power and have a much longer lifespan, reducing the need for frequent bulb replacements.
Overall, the ZX-12R LED Brake Tail Light Integrated Turn Signal is a great upgrade for any Kawasaki ZX-12R motorcycle. Its bright LED bulbs, integrated turn signals, and durable construction make it a must-have accessory for any rider looking to improve the functionality and appearance of their bike.
Pros of buying a ZX-12R LED Brake Tail Light Integrated Turn Signal (Part Number: 058IT 815726023536) for Kawasaki ZX-12R (1999-2005):1. Improved Visibility: The LED bulbs provide brighter and more focused light compared to traditional incandescent bulbs, making the bike more visible to other drivers, especially in low-light conditions.
2. Integrated Turn Signals: The tail light and turn signals are combined into a single unit, which not only looks more streamlined but also eliminates the need for separate turn signal housings.
3. Energy Efficient: LED bulbs consume less power than incandescent bulbs, which can help extend battery life and improve fuel efficiency.
4. Long Lifespan: LED bulbs have a longer lifespan than incandescent bulbs, which means less frequent bulb replacements.
Cons of buying a ZX-12R LED Brake Tail Light Integrated Turn Signal (Part Number: 058IT 815726023536) for Kawasaki ZX-12R (1999-2005):1. Cost: LED bulbs and integrated units can be more expensive than traditional incandescent bulbs and separate turn signal housings.
2. Installation: Some customers have reported that the installation process can be more complex than installing traditional bulbs and turn signal housings.
3. Compatibility: It's important to ensure that the part is compatible with your specific model of Kawasaki ZX-12R (1999-2005) before purchasing.
Recommendation: If you are looking for improved visibility, a more streamlined appearance, and energy efficiency, the ZX-12R LED Brake Tail Light Integrated Turn Signal (Part Number: 058IT 815726023536) is a great option. However, be prepared for a higher upfront cost and potential installation complexity. Make sure to research compatibility with your specific model before purchasing to avoid any compatibility issues.
The ground wire is same color used on both turn signals. Connect one end of the resistor to ground wire on your turn signal harness from bike.
Use the red connectors:place one wire inside along channel, place another other channel. Repeat the same process for other side.
Return: ground wire is not needed unless you are using resistors to adjustment the blinking rate or instrument panel garbled.
Frequently questions:installation of built-in turn signals:connect the two yellow wires to positive signal using provided red connectors or alternately use your existing factory. 9 of problems, we care for every customer. If you are using the resistors, place one end of resistor in middle either channel along with wire.
Connect the other end of resistor to both yellow wire from our taillight and positive turn signal your harness bike.